Haier AS35RHBHRA Air Conditioner Manual

The Haier AS35RHBHRA is a high-efficiency air conditioning unit designed to provide optimal cooling and comfort for residential spaces. This model features advanced cooling technology, energy-saving modes, and user-friendly controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Energy-efficient compressor, remote control, adjustable thermostat, multiple fan speeds, and programmable timer.

FeatureDescription
Energy-efficient compressorReduces energy consumption while providing effective cooling.
Remote controlConvenient operation from a distance.
Adjustable thermostatAllows precise temperature control.
Multiple fan speedsCustomizable airflow for comfort.
Programmable timerSet the unit to turn on/off at specific times.

Installation

Carefully unpack the air conditioner and inspect for any damage. Follow the steps below for proper installation.

  1. Choose a suitable location: Ensure the unit is placed on a stable surface with adequate airflow.
  2. Install the mounting bracket: Securely attach the bracket to the wall as per the instructions.
  3. Connect the drainage hose: Ensure proper drainage to avoid water accumulation.
  4. Plug into a power source: Use a dedicated outlet to prevent overload.

WARNING! Ensure the unit is securely mounted to avoid accidents. Follow all safety guidelines during installation.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts to configure settings.

  1. Select cooling mode: Use the remote to choose between cooling, fan, and dehumidification modes.
  2. Set temperature: Adjust the thermostat to your desired comfort level.
  3. Program timer: Set the timer for automatic operation.

CAUTION! Ensure the unit is properly installed before powering on.

Specifications

Controls and Settings

Access settings via the remote control or the unit's control panel. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: POWER, MODE, FAN, TEMP UP/DOWN, TIMER.

Settings: Adjust temperature, select cooling modes, and set timers for convenience.

Connecting Devices

Ensure proper connections for optimal performance.

  1. Turn off the unit before connecting any external devices.
  2. Use compatible cables for any additional features.
  3. Follow the manufacturer's instructions for connecting smart devices.

Tip: Ensure all connections are secure to avoid performance issues.

Operating the Air Conditioner

To operate the air conditioner, follow these steps:

  1. Power on the unit using the remote or control panel.
  2. Select the desired cooling mode.
  3. Adjust the temperature and fan speed as needed.
  4. Monitor the operation through the display panel.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety and efficiency standards. For support, visit www.haier.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit does not turn onPower supply issueCheck power connection and circuit breaker.
No coolingIncorrect settingsEnsure the unit is set to cooling mode.
Excessive noiseLoose partsInspect for loose components and tighten as necessary.
Water leakageBlocked drainageClear any blockages in the drainage system.

Reset: Follow the reset procedure in the manual if issues persist.

Service: For further assistance, contact customer service.

Haier AS35RHBHRA Air Conditioner Manual © - All Rights Reserved 2026